Rope-wrapped tin can holders

How to make it

1. 

   1

   Check the rim

   Run a finger carefully around the top. Cover any sharp edge with electrical tape.

2. 

   2

   Start at the bottom

   Run a line of glue around the bottom of the can. Press the rope end on.

3. 

   3

   Wind upward

   Wrap the rope around and up, pushing each row snug against the last.

4. 

   4

   Glue as you go

   Add a line of glue every few rows.

5. 

   5

   Finish at the top

   Cut the rope at the rim and glue the end down firmly.

6. 

   6

   Add a band

   Tie a strip of lace or fabric around the middle, if you like.