Entryway key holder

How to make it

1. 

   1

   Sand the board

   Sand with 120, then 180 grit. Round the corners slightly.

2. 

   2

   Stain it

   Wipe on stain, wait 5 minutes and wipe off the extra. Let it dry 4 hours.

3. 

   3

   Mark the hooks

   Mark 4 hook spots across the middle: 3 1/2 in from each end and 3 in apart.

4. 

   4

   Drill starter holes

   Drill tiny starter holes for each hook screw. This keeps the board from splitting.

5. 

   5

   Screw on the hooks

   Attach each hook so they all point the same way.

6. 

   6

   Hang it

   Hold it level and screw through the board into a stud, or into rated anchors. Hang your keys. Done.